MATERIALS
Nested pans / double boiler
Partially burned candles
Candy or candle thermometer
Tongs
New wicking
Teacups
Wick sustainers
Wooden skewers
INSTRUCTIONS
- In a small pan set over a larger pan of simmering water, melt down old candles; clip the thermometer to the upper pot, and keep temperature at about 185°. Remove old wicks with tongs.
- Cut a piece of wicking to the cup’s height plus 2 inches. Clamp one end to a wick sustainer; tie the other end around a skewer. Dip wicking and sustainer into melted wax to coat them. Remove and stick sustainer to cup’s bottom.
- Pour in the wax, stopping 1/2 inch below the cup’s rim. Allow wax to set, about 1 hour. The candle will harden with a well in the center. To even it out, use another skewer to prick a circle of holes about 1/16 inch deep around the wick. Pour in melted wax until surface is 1/4 inch below rim. Cut wick.
MATERIALS
Candle wax (you can also use crayons)
Cardboard milk and/or cream cartons
Wick (wax coated)
Ice (cubes)
INSTRUCTIONS
- Melt the candle wax &/or crayons. This is best done by filling one pot up with water and placing a second (thrift store) pot on top - like a double boiler. You won't want to use the same pot to melt your wax in that you'd normally cook food in.
note: you can also add fragrance to your candle. Craft stores have special oils and fragrant waxes you can incorporate into your wax as it's melting
- Cut the carton to a desired height.
- Cut the wick about 4 inches taller than your desired candle
- Secure the wick in the carton, tying the top to a pencil or tongue depressor (so it won't fall into the carton)
- fill the carton with ice cubes. The coarser|larger the cubes are, the larger the holes in the candle.
- Make sure the wick is standing upright and pour the melted wax into the carton.
- When wax is set (ice will have melted) remove the milk carton and you have a candle that kind of looks like swiss cheese. There may be some water that will drain out as you remove the carton.